When an unsightly cement haze covers the facade, ILKA®-SZ can help. It can also be used to remove efflorescence and rust. The acidic cleaning concentrate dissolves the contamination of natural and artificial stone, concrete and clinker in the exterior.
To do this, dampen the surfaces with water, apply ILKA®-SZ with a painter's puff or brush, allow to act for 10 - 15 minutes and wash off with cold water + brush or spray off with a high-pressure cleaner - done! So easy you come back to a clean facade.
Always read labels and product information before use.
1 liter units are supplied in bottles, 10 - 30 liter units in canisters, 120 - 220 liter units in barrels and the 1000 liters in IBC.
Pre-wet the soiled surfaces with cold water. Apply ILKA-SZ-Cement Film Remover with a painter's puff or brush until saturated, allow to act for 10 - 15 minutes. Then wash the surface with cold water and a brush. Alternatively, the surface can be washed with cold water and a high-pressure cleaner. ILKA-SZ can be diluted with cold water, but should be used undiluted in case of heavy soiling. It should be tested on a sample surface before application. ILKA-SZ is not suitable for marble, enamel and glazed, polished or finely ground stone surfaces, metals, aluminum, lacquers or acid-sensitive surfaces. ILKA-SZ must not be applied with a high-pressure device.
Hazard class: irritant
pH value: pur 2
Consumption: approx. 250 g/m²
The containers must be stored dry, closed and cool. Shelf life
at least 24 months. The product is frost resistant.
Disposal according to official regulations! More detailed information on disposal can be found in the current safety data sheet.
The usual rules for handling chemicals apply: wear protective goggles, acid-proof gloves and protective clothing. In case of contact with skin or eyes, rinse affected areas immediately with plenty of cold water.
There are no reviews yet.