The chlorine-free ILKA® sanitation solution is used to remove fungi, algae, moss, green growth and mold from masonry, roof tiles, facades and concrete slabs as well as from stones, plaster, wood and glass. The sanitation solution is chlorine and acid-free, has an immediate, visible and disinfecting effect - and all in just one operation! A real alternative, especially for projects where authorities or communities restrict the ingredients. A preventive after-treatment with ILKA-Sanierschutz is recommended to protect the surfaces from renewed rapid soiling.
Remove unsightly deposits and mold from your property with the chlorine-free sanitation solution
Especially in old properties and locations with a high environmental impact, such as industrial sites, unsightly coatings usually form, making the facades and roofs unsightly. The ILKA®-Sanierlösung chlorfrei removes these quickly and brings back the original shine. Especially before selling a property, it is worthwhile to use it, as a visually appealing exterior and the impression of a rather young and fresh property should significantly increase the sales value. Of course, the agent is also suitable for ETICS. Test it - we are sure you will be convinced!
Always read labels and product information before use. No sale to private customers.
1 liter units are supplied in bottles, 10 - 30 liter units in canisters, 120 - 220 liter units in barrels and the 1000 liters in IBC.
Do not dilute the chlorine-free ILKA sanitation solution. With a brush; brush
or apply by spraying on the affected areas. That
Product should act for approx. 6-12 hours. Protect surfaces from rain during the exposure time. Then the
visible (killed) infestation mechanically with a brush or
removed or washed off with a high-pressure device. With strong
Infestation, or should there still be residues of dirt on the facade
present, repeat the operation.
After that, when the surface has dried, the surface
Protected against rapid subsequent contamination with ILKA renovation protection
Irritating to eyes
and the skin. Must not get into the hands of children. no plants,
Spray fabrics, raw metal and paint with the product.
Wash off splashes immediately with plenty of water.
Do not process below +8°C.
Hazard class: Corrosive, dangerous for the environment
pH value: 7
Consumption: after infestation approx. 125 g/m²
The containers must be stored dry, closed and cool. Shelf life
At least 24 months. The product is not frost resistant.
Disposal according to official regulations! More detailed information on disposal can be found in the current safety data sheet.
The usual rules for handling chemicals apply: wear protective goggles, acid-proof gloves and protective clothing. In case of contact with skin or eyes, rinse immediately affected areas with plenty of cold water. Wash surfaces that come into contact with food with clean water. Use biocides safely. Always read label and product information before use.
There are no reviews yet.